NFKF5-30高速口服液洗烘灌轧联动线
分类: 制药灌装生产联动线  发布时间: 2019-01-02 16:07 

NFKF5-30高速口服液洗烘灌轧联动线
用途与简介: 口服液洗烘灌轧联动线由立式超声波洗瓶机、隧道式热风循环灭菌烘箱、口服液灌装轧盖机等组成,适合于 5-30ml 等不同规 格口服液瓶的生产。可完成

用途与简介:/Purpose and introduction

口服液洗烘灌轧联动线由立式超声波洗瓶机、隧道式热风 循环灭菌烘箱、口服液灌装轧盖机等组成,适合于 5-30ml 等不同规 格口服液瓶的生产。可完成对药品生产中安瓿瓶淋水、超声波清洗、冲水、充 气、烘干灭菌、冷却、灌装、轧盖等工艺步骤的联动运行。

Oral liquid washing drying filling and rolling line by the vertical ultrasonic bottle-washing machine, tunnel sterilization oven hot wind cycle, oral liquid filling and other components of the rolling machine, suitable for 5-30 ml different gauge, etc Oral liquid bottle production. Can be done for ampoule bottle pour water in drug production, ultrasonic cleaning, flushing, filling gas, drying sterilization, cooling, filling and rolling cover joint operation of the process steps.

特点:/characteristic

◆洗瓶机采用机械手夹瓶,适用多种规格的瓶子;

Bottle washer adopts manipulator clamp bottle, is suitable for a variety of specifications of the bottle;

◆洗瓶采用水气喷针往复跟踪插入方式,清洗效果好,节约能源。并设有针架防抖动装置,提高喷针插入瓶子的准确度,减少断针现象发生;

Reciprocating mixer washing bottle with water spray needle track insert way, cleaning effect is good, save energy. And is equipped with needle shake device, improve the accuracy of injection needle inserted into the bottle, reduce breakage phenomenon;

◆洗瓶整个水气管路、喷针完全独立分开,避免了交叉污染,符合GMP规范要求;

Mixer washing bottle the water pipe, injection needles completely separate, to avoid the cross contamination, in line with the GMP requirements;

◆洗瓶机进瓶螺杆前加装缓冲块,有保护螺杆,减少碎瓶作用

Pieces into the bottle inside the screw before adding buffer block, protect the screw, reduce broken bottles

◆洗瓶机出瓶采用整体进口同步带,连接拨块输送口服液,运行稳定可靠

In pieces out of the bottle inside the whole import synchronous belt, the connection piece of conveying liquid, stable and reliable running

◆烘箱采用红外线加热管,不锈钢加热管双层加热温度均匀性好;

Oven using infrared heating tube, stainless steel heating tube double heating temperature uniformity is good;

◆灌装轧盖机可选配陶瓷泵、不锈钢泵;

In pieces filling rolling machine optional ceramic pump, stainless steel pump;

◆灌装无瓶止灌,无瓶不轧盖功能。

Pieces filling without bottle filling, no bottle no rolling function.

◆整线采用PLC总控制、变频器、触摸屏控制技术,运行稳定可靠。触摸屏可显示各单机的运行状态,各控制点的水压、气压、风压、温度等显示,各开关状态和故障显示,故障自我诊断和故障分析及排除方法。使整个生产过程达到自动化控制,联线具有三机自控平衡装置,保证生产均衡可靠。

The whole line adopts PLC control, inverter, touch screen control technology, stable and reliable running. Touch screen can display the running state of each units, each control point of the water pressure, air pressure, air pressure, temperature, etc, according to the switch state and fault display, fault self-diagnosis and fault analysis and elimination method. The whole production process to achieve automatic control, on-line has the compressors control balancing device, ensure production is balanced.

根据客户的需要,还可供选配:

According to the needs of customers, but also available for selection:

◆西门子、施耐德、三菱、台达等品牌控制系统;

Pieces of Siemens, schneider, mitsubishi, Taiwan brands such as control system;

◆水、气压力、水温及超声波强度、尘埃粒子、风速在线检测、报警、记录、打印系统。

Pieces of water, gas pressure, water temperature and the intensity of ultrasonic, dust particles, wind speed on-line detection, alarm, record and print system.

◆ORABS、CRABS、无菌隔离器系统。

Mixer ORABS, CRABS, aseptic isolator system.

技术参数:technical parameters

适用规格Cutting dimension(ml)

5-25ml

生产能力production capacity(pcs/min)

350-400瓶

灌装精度Filling accuracy(%)

≤ ± 2.5

灌装头数Fillingheads

16

轧盖头数Number of rolling curtain

单刀20头

轧盖合格率Rolling cover percent of pass(%)

≥ 99

总重量total weight(kg)

7500

外形尺寸boundary dimension(mm)

9920 × 2003 × 2150

上一产品:没有了
下一产品:没有了